RIDGID 18V to Dyson V6 Battery Adapter

Use your RIDGID 18V batteries on Dyson V6 cordless tools, without buying into a second battery platform. Constructed from durable molded ABS with pure copper contacts, for a secure fit and dependable current transfer. It keeps one battery platform serving more tools, which costs less than buying into another. It also carries battery protection electronics (BMS) inside.

Specifications

• SKU PTA-RID18V-DYSV6
• Fits this battery RIDGID 18V (Lithium-Ion) from Home Depot
• Battery voltage 18V
• Runs these tools Dyson V6 (Lithium-Ion)
• Housing ABS (Injected)
• Terminals Copper
• Current rating 55A continuous (100A peak at 18VDC for up to 2 seconds)1188 Watt continuous at 21.6V nominal
• Weight 142 g (5.0 oz / 0.31 lb)
• Colour Grey
• Operating humidity 5–95% RH
• Operating temperature -10 °C to 50 °C (14 °F to 122 °F)
• USB port No
• Built-in BMS protection Yes
• What's in the box Battery adapter
• Warranty 12 months after the date of delivery
• Revision Revision 01 (released on November 17, 2025)

Why choose this adapter

• A Battery Management System inside the adapter cuts power before the battery is drained too far — protection your battery may not have on its own.
• Injection-moulded ABS, not 3D printed — no layer lines to split under load.
• Solid copper terminals, so less of the current is lost as heat.
• Rated for 55A continuous with 100A peak at 18VDC for up to 2 seconds, so a high-draw tool is not held back by the adapter.
• Made for the RIDGID 18V batteries sold at Home Depot, so the fit is the one you already own.
• Covered by a 12-month warranty from the day it arrives.

RIDGID 18V and Dyson V6 compatibility

It works in one direction only: RIDGID batteries powering Dyson tools. For the opposite pairing, see adapters that run on Dyson V6 batteries.

Compatibility can vary with the exact battery and tool model. Before ordering, confirm that your battery belongs to the RIDGID 18V platform and that your tool takes Dyson V6 batteries.

Important charging and safety information

This adapter is for powering cordless tools and nothing else. It cannot charge RIDGID or Dyson batteries and must never be connected to a charger of any kind. Always take the battery out of the adapter before charging, and charge it on the original charger made for your RIDGID 18V battery.

Before you buy

Use a battery of at least 3 Ah — 4 Ah or more is better. A higher-voltage tool draws harder on the battery, and a small one can sag until its own protection cuts out before it is empty.